Interface USB <> RS422/RS485 industry

Implementation USB <> RS422 / RS485 with galvanic isolation.

#36201

USB <> RS232 Interface Cable

Industry-compliant design on account of noise immunity in accordance with EN 61000-6-2.
Galvanic isolation with an insulation voltage of min. 1 kV.
Broad supply voltage range of 12 ... 24 V AC / DC
Housing for top-hat-rail installation in accordance with DIN EN 50022-35.
USB 2.0 Full Speed Device (12 Mbit/s) Addressable as virtual COM interface under Windows 98 / Me / 2000 / XP.
Direct Linux support without additional driver from kernel version 2.4.0
Support of all RS232 data and handshake lines RxD, TxD, RTS, CTS, DSR, DTR, DCD, RI

#38201

USB <> 20mA med galv. isolation

Implementation USB <> 20 mA with galvanic isolation in all operating modes

#34201

USB <> RS232 Interface cable

USB <> RS232 conversion in the connecting cable

For several years now, the RS232 interface has been established as a well-proven interface for connecting serial end devices over short and medium distances.
In order to be able to rely on this dependable standard in the future too, with the interface cable USB <> RS232, Wiesemann & Theis provides a converter in the form of a connection cable having a length of two meters which even enables the connection of your RS232 devices to computers that do not have a serial interface.

The converter fulfils the industrial noise immunity standard specification EN61000-6-2 and the emission standard specification EN55022B. For that reason, despite its miniature design and its attractive price, the interface cable can be deployed without restriction not only in the industrial environment but also in the office domain.

#38001

RS232 <> RS422/485 Interface

Conversion for RS232 <> RS422/RS485,
not isolated

RS422 bi-directional, with handshake and RS485 automatic mode and no re-configuration of transmission parameters required.
Highlights of model 86000 Compact adapter solution.
Integrated termination network for RS485 operation Suitable as "non-intelligent" converter for RS485 field buses (e.g. profibus, CS31, etc.) <> RS232.

#86000

RS232 <> RS422/RS485 interface, Industry

#86201 RS232<> RS422/485 Interface

#86201

RS232 <> RS422, 50KV Isolated

Effective lighting protection as connecting cable between RS232 and RS422 devices

There is no protection against damage from lightning that hits your wiring system, due to the extremely high energy of the bolts. However, it is useful to protect your IT installation against damage from lightning that impacts on lines far away from your premises by using electrical isolators. An isolation of only 1kV already reliably protects you against most lightning damage. With an electrical strength of 50kV, the chance for such damage is practically nil. The experience of the last few years shows that customers, who had considerable damage done to their IT devices by lightning reported no such incidents since they had installed isolators.

#86050 RS232 <> RS422, 50KV isolated

#86050

RS232 <> 20mA Compact, 1KV Isol.

Conversion for RS232 <> 20mA for active of passive mode.

#84001 RS232 <> 20mA, Compact

RS232 <> 20mA Industry

Conversion for RS232 <> 20mA, isolated in all operating modes.

#84201 RS232 <> 20mA Industry

#84201

RS232 <> 20mA Siemens

Conversion from RS232 to 20 mA, plug compatible to Siemens S5.

#84003 RS232 <> 20mA for Siemens S5

RS232 <> 20mA Isolated

Effective lighting protection as connecting cable between RS232 and 20mA devices.

#84050 RS232 <> 20mA, 50KV isolated

20 mA <> RS422/RS485 Industry

Conversion for RS422/RS485 <> 20mA with electrical isolation.

#64201 20mA <> RS422/RS485 Industry

#64201

Continue to use printers with serial standard interfaces.

Here you will find solutions for printers with serial interface.

#28000 Centronics > RS232

#28000
#26000
#24000