Fiber optic 9 og 25 pin

EMC will keep us busy in the coming years. Compliance with new regulations (e.g. CE mark), but also the increasing network density and transfer frequencies are resulting in new requirements to be met by transmission lines and connections between devices. Fiber-optic cables fulfill all requirements of a modern and future-proof connection.

Here you have the solution for a cheap and secure dataline for seriel data communication.

#81009 Fiber optic <> RS232, 9-pin for PC
#81025 Fiber optic <> RS232, 25-pin DCE
#81026 Fiber optic <> RS232, 25-pin DTE

POF <> RS232 interface

#81201 Fiber optic <> RS232 in hat rail housing.
#81202 Fiber optic <> RS232 with hardware handshake.

POF <> 20 mA interface for Simens S5

With this item the communication with Simens S5 units from a PC will go weel up to a distance of 100 meter in a 100% Isolated environment.

#41015 Fiber optic <> 20mA, 15-pin for Siemens S5

POF <> 20 mA interface, Industri

Make a secure communication with 20mA interface trough fiber optic cable up to 100 meter.

Active/passive mode for transmission and reception loop separately adjustable Integrated surge protection Electrical isolation to almost any extent between the connected devices No re-configuration of transmission parameters required Extended supply voltage range up to 24V Top hat rail housing according to DIN EN 50022-35.

#41201 Fiber optic <> 20mA, Industri

#41201

POF <> RS422/RS485 industry interface

Control circuits are often electrically isolated. If the controllers are grounded over the control bus and the PC, the entire control circuit might be disrupted by equalizing currents. It must be ensured that the bus is electrically isolated when connected to the PC, or that the PC is isolated by suitable measures such as UPS.

RS485 2 and 4 wire compatible RS485 automatic mode. Integrated surge protection Electrical isolation to almost any extent between the connected bus participants. No re-configuration of transmission parameters required. Extended supply voltage range up to 24V. Top hat rail housing according to DIN EN 50022-35

#61201 Fiber optic <> RS422/RS485

POF <> profibus interface, Industry

#61202 Fiber optic <> Profibus

#61202

Fiber Optisk Repeater

The main advantages of plastic optical fiber cables over conventional glass fiber lines are the lower costs for material and the very simple installation. Unfortunately, the attenuation of plastic optical fiber cables is considerably higher than that of glass fibers, so that the max. possible transfer distance is only approx. 100 m for physical reasons. Problems in connection with higher attenuation can be avoided by dividing a long fiber-optic line into short segments with a maximum length of 100 m and by installing one or more repeaters. The repeater regenerates and amplifies the received signals and feeds the data at original intensity level through the fiber.

#11201 Fiber optic Repeater